Honda Accord 2008 Manual page 504

Hide thumbs Also See for Accord 2008:
Table of Contents

Advertisement

07/11/02 09:10:07 61TA0000_110_0185
9. Replace the A/F sensor (Sensor 1) (see page
11-225).
10. Reconnect all connectors.
11. Turn the ignition switch to ON (II).
12. Reset the ECM/PCM with the HDS.
13. Do the ECM/PCM idle learn procedure (see page
11-343).
14. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P2238 indicated?
YES
Check for poor connections or loose
terminals at the A/F sensor (Sensor 1) and the ECM/
PCM, then go to step 1. If the connector and
terminal fits are OK, go to step 16.
NO
Go to step 15.
15. Monitor the OBD STATUS for DTC P2238 in the
DTCs MENU with the HDS.
Does the screen indicate PASSED?
YES
Troubleshooting is complete. If any other
Temporary DTCs or DTCs were indicated in step 14,
go to the indicated DTC's troubleshooting.
NO
If the screen indicates FAILED, check for poor
connections or loose terminals at the A/F sensor
(Sensor 1) and the ECM/PCM, then go to step 1. If
the screen indicates NOT COMPLETED, keep idling
until a result comes on.
16. Update the ECM/PCM if it does not have the latest
software (see page 11-231), or substitute a known-
good ECM/PCM (see page 11-7).
17. Start the engine, and let it idle.
18. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P2238 indicated?
YES
If the ECM/PCM was updated, substitute a
known-good ECM/PCM (see page 11-7), then go to
step 17. If the ECM/PCM was substituted, go to step
1.
NO
Go to step 19.
19. Monitor the OBD STATUS for DTC P2238 in the
DTCs MENU with the HDS.
Does the screen indicate PASSED?
YES
If the ECM/PCM was updated,
troubleshooting is complete. If the ECM/PCM was
substituted, replace the original ECM/PCM
(see page 11-232). If any other Temporary DTCs or
DTCs were indicated in step 18, go to the indicated
DTC's troubleshooting.
NO
If the screen indicates FAILED, go to step 1. If
the ECM/PCM was updated, substitute a known-
good ECM/PCM (see page 11-7), then go to step 17.
If the ECM/PCM was substituted, go to step 1. If the
screen indicates NOT COMPLETED, keep idling
until a result comes on.
11-185

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents