Honda Accord 2008 Manual page 570

07/11/02 09:12:42 61TA0000_110_0251
16. Check for continuity between ETCS control relay 4P
connector terminal No. 3 and ECM/PCM connector
terminal A21.
＊０５
Is there continuity?
YES
NO −
PCM (A21) and the ETCS control relay, then go to
step 23.
17. Remove the ETCS control relay (A) from the under-
hood fuse/relay box.
＊０６
ETCS CONTROL RELAY 4P CONNECTOR
ETCSRLY
Terminal side of
female terminals
ETCSRLY
(WHT)
ECM/PCM CONNECTOR A (49P)
Terminal side of female terminals
− Go to step 28.
Repair open in the wire between the ECM/
A
18. Jump the SCS line with the HDS.
19. Disconnect ECM/PCM connector C (49P).
20. Check for continuity between ECM/PCM connector
terminal C1 and body ground.
ECM/PCM CONNECTOR C (49P)
IG1ETCS (YEL/GRN)
Terminal side of female terminals
Is there continuity?
YES − Repair short in the wire between the ECM/
PCM (C1) and the ETCS control relay, then go to
step 23.
−
NO Go to step 21.
＊０７
(cont'd)
11-251