Honda Accord 2008 Manual page 552

07/11/02 09:11:58 61TA0000_110_0233
4. Select the PGM-FI system with the HDS.
5. Select the INSPECTION MENU with the HDS.
6. Select the ETCS TEST, then select the TP POSITION
CHECK, and follow the screen prompts.
NOTE: If the TP POSITION CHECK indicates FAILED,
continue with this procedure.
7. Select the REPLACE ECM/PCM MENU, then READ
DATA, and follow the screen prompts.
NOTE:
• Doing this step copies (READS) the engine oil life
data from the original ECM/PCM so you can later
download (WRITES) it into the new ECM/PCM.
• If READ DATA indicates FAILED, continue with
this procedure.
8. A/T models: Select the A/T system with the HDS.
9. A/T models: Select the REPLACE TCM/PCM MENU,
then READ DATA, and follow the screen prompts.
NOTE:
• Doing this step copies (READS) the ATF life data
from the original PCM so you can later download
(WRITES) it into the new PCM.
• If READ DATA indicates FAILED, continue with
this procedure.
10. Turn the ignition switch to LOCK (0).
11. Do the battery removal procedure (see page 22-90).
12. Remove the bolts (D).
D
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
C
B
A
13. Disconnect ECM/PCM connectors A, B, and C, then
remove the ECM/PCM assembly (E).
NOTE: ECM/PCM connectors A, B, and C have
symbols (A= , B= , C= ) embossed on them for □ △ ○
identification.
＊０２
E
(cont'd)
11-233