Output Shaft (Countershaft) Speed Sensor Replacement; Knock Sensor Replacement - Honda Accord 2008 Manual

07/11/02 09:11:57 61TA0000_110_0229
Output Shaft (Countershaft) Speed
Sensor Replacement
1. Disconnect the output shaft (countershaft) speed
sensor 3P connector (A).
＊０１
C
2. Remove the output shaft (countershaft) speed
sensor (B).
3. Install the parts in the reverse order of removal
with a new O-ring (C).
ＴＡ０８ＡＥＡＡ２０３２６９４３８２１ＫＢＡＴ００

Knock Sensor Replacement

1. Remove the intake manifold (see page 9-3).
2. Disconnect the knock sensor connector (A).
A
B
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
3. Remove the knock sensor (B).
4. Install the parts in the reverse order of removal.
ＴＡ０８ＡＥ４Ａ２０３２６９３６３０１ＫＢＡＴ２０
A
B
31 N·m
(3.2 kgf·m,
23 lbf·ft)
11-229 11-229
＊０１