Honda Accord 2008 Manual page 538

07/11/02 09:11:01 61TA0000_110_0219
68. Check for continuity between PGM-FI main relay 1
4P connector terminal No. 2 and ECM/PCM
connector terminal A9.
＊２４
ECM/PCM CONNECTOR A (49P)
Is there continuity?
YES
NO −
PCM (A9) and PGM-FI main relay 1.
69. Test PGM-FI main relay 1 (see page 22-91).
Is PGM-F I main relay 1 OK ?
YES
NO −
PGM-FI MAIN RELAY 1 4P CONNECTOR
IGP
Terminal side of
female terminals
IGP (YEL/BLK)
Terminal side of female terminals
− Go to step 69.
Repair open in the wire between the ECM/
−
Go to step 70.
Replace PGM-FI main relay 1.
70. Disconnect ECM/PCM connector B (49P).
71. Check for continuity between body ground and
ECM/PCM connector terminals B1, B10, C2, C44,
and C48 individually.
ECM/PCM CONNECTORS
B (49P)
PG2 (BLK) PG1 (BLK)
C (49P)
PGMETCS (BLK)
LG1
(BRN/YEL)
Terminal side of female terminals
Is there continuity?
−
YES Go to step 72.
NO − Repair open in the wire between the ECM/
PCM (B1, B10, C2, C44, C48) and G101 (see page
22-20).
LG2
(BRN/YEL)
(cont'd)
11-219
＊２５