Honda Accord 2008 Manual page 478

Hide thumbs Also See for Accord 2008:
Table of Contents

Advertisement

07/11/02 09:05:56 61TA0000_110_0159
13. Test-drive under these conditions:
• Engine coolant temperature (ECT SENSOR 1)
above 158 °F (70 °C)
• A/T in D, M/T in 5th
• Drive at a steady speed between 55 75 mph
(88 120 km/h) for 10 seconds
• During the drive, decelerate (with throttle fully
closed) for at least 2 seconds
14. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P1129 indicated?
YES
Check for poor connections or loose
terminals at the MAP sensor and the ECM/PCM,
then go to step 1.
NO
Go to step 15.
15. Monitor the OBD STATUS for DTC P1129 in the
DTCs MENU with the HDS.
Does the screen indicate PASSED?
YES
Troubleshooting is complete. If any other
Temporary DTCs or DTCs were indicated in step 14,
go to the indicated DTC's troubleshooting.
NO
If the screen indicates FAILED, check for poor
connections or loose terminals at the MAP sensor
and the ECM/PCM, then go to step 1. If the screen
indicates NOT COMPLETED, go to step 12.
11-159

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents