Ect Sensor 1 Replacement; Ect Sensor 2 Replacement - Honda Accord 2008 Manual

07/11/02 09:11:56 61TA0000_110_0228
PGM-FI System

ECT Sensor 1 Replacement

1. Drain the engine coolant (see page 10-6).
2. Disconnect the ECT sensor 1 connector (A).
＊０１
A
3. Remove ECT sensor 1 (B).
4. Install the parts in the reverse order of removal
with a new O-ring (C), then refill the radiator with
engine coolant (see page 10-6).
11-228 11-228
ＴＡ０８ＡＥ４Ａ２０３２６９２４７１１ＫＢＡＴ１０

ECT Sensor 2 Replacement

1. Remove the splash shield.
2. Drain the engine coolant (see page 10-6).
3. Disconnect the ECT sensor 2 connector (A), then
B
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
C
4. Install ECT sensor 2 with a new O-ring (C).
5. Install the splash shield.
6. Refill the radiator with engine coolant (see page
ＴＡ０８ＡＥ４Ａ２０３２６９２４７１１ＫＢＡＴ０１
remove ECT sensor 2 (B).
A
C
10-6).
＊０２
B
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)