07/11/02 09:11:55 61TA0000_110_0226
PGM-FI System
CMP Sensor B Replacement
1. Disconnect the connector (A) and hoses (B) from
the EVAP canister purge valve (C), then remove the
EVAP canister purge valve assembly.
*01
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
2. Disconnect the CMP sensor B connector (A).
*02
A
3. Remove CMP sensor B (B).
4. Install the parts in the reverse order of removal
with a new O-ring (C).
11-226
11-226
TA08AE4A20326916081KBAT10
B
C
C
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
CKP Sensor Replacement
1. Lift the vehicle, and support it with jackstands.
2. Remove the CKP sensor cover (A).
A
B
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
3. Disconnect the CKP sensor connector (B).
4. Remove the CKP sensor (C).
5. Install the parts in the reverse order of removal
with a new O-ring (D).
6. Do the CKP pattern clear/CKP pattern learn
procedure (see page 11-5).
B
TA08AE4A20326917523KBAT20
A
*01
C
D