Transmission Removal - Honda Civic 2002-2003 Service Manual

Manual Transmission
Transmission Removal
Special Tools Required
• Engine hanger adapter, 2.0 to 2.4 liter VSB02C000015
• Engine hanger VSB02C000018
• Engine support hanger, A & Reds AAR-T-12566'
• Subframe adapter EQS02C000011'
*
Available through the Honda Tool and Equipment
Program 888-424-6857
NOTE: Use fender covers to avoid damaging painted
surfaces.
1. Write down the frequencies for the radio's preset
buttons. Disconnect the negative (-) cable first,
then the positive
(+)
cable from the battery.
Remove the battery.
2. Remove the intake manifold COver (see page 9-3).
3. Remove the air cleaner housing (see page 11-162).
4. Remove the intake air duct (see step 8 on page 5-3).
5. Remove the battery tray (A).
B
6. Disconnect the transmission ground cable
(8).
7. Disconnect the back-up light switch connector (A)
and vehicle speed sensor (VSS) connector (B).
13-4
8. Remove the cable bracket (A), then disconnect the
cables (B) from the top of the transmission housing.
Carefully remove both cables and the bracket
together so as not to bend the cables.
B
9. Remove the harness clip.
•
•
•