Suzuki Baleno Manual page 1259

Sy413, sy416, sy418
Hide thumbs Also See for Baleno:
Table of Contents

Advertisement

SCAN TOOL DATA
DESIRED IDLE
(DESIRED IDLE
(DESIRED IDLE
SPEED)
TP SENSOR VOLT
(
(THROTTLE POSITION
SENSOR OUTPUT
VOLTAGE)
INJ PULSE WIDTH
(FUEL INJECTION
(
PULSE WIDTH)
IAC FLOW DUTY (IDLE
AIR CONTROL FLOW
DUTY)
TOTAL FUEL TRIM
BATTERY VOLTAGE
CANIST PRG DUTY
(EVAP CANISTER
PURGE FLOW DUTY)
CLOSED THROT POS
(CLOSED THROTTLE
(CLOSED THROTTLE
POSITION)
FUEL CUT
FUEL CUT
RADIATOR FAN
(
(RADIATOR FAN
CONTROL RELAY)
ELECTRIC LOAD
ELECTRIC LOAD
A/ C SWITCH
/ C S
C
PNP SIGNAL (PARK/
NEUTRAL POSITION
NEUTRAL POSITION
SIGNAL) (4 A/T only)
EGR VALVE
FUEL TANK LEVEL
BAROMETRIC PRESS
FUEL PUMP
U
U
BLOWER FAN
BLOWER FAN
A/C COND FAN
(A/C CONDENSER FAN
(
RELAY)
PSP SWITCH
(POWER STEERING
(POWER STEERING
PRESSURE SWITCH)
ENGINE GENERAL INFORMATION AND DIAGNOSIS (G13/G16 ENGINE WITH WU TWC) 6-1-29
CONDITION
At idling with no load after warming up, M/T at
d g
o oad a e
neutral, A/T at "P" range
Throttle valve fully closed
Ignition switch
ON/ engine
ON/ engine
stopped
Throttle valve fully open
At specified idle speed with no load after
warming up
At 2500 r / min with no load after warming up
At idling with no load after warming up
At specified idle speed after warming up
Ignition switch ON / engine stop
––––––––––––
Throttle valve at idle position
Throttle valve opens larger than idle position
When engine is at fuel cut condition
Other than fuel cut condition
Engine coolant temp.:
Lower than 93_C
Ignition switch
ON
ON
Engine coolant temp.:
98_C (208_F) or higher
Ignition switch ON / Headlight, small light and
rear window defogger all turned OFF
Ignition switch ON / Headlight, small light or rear
window defogger turned ON
Engine running after warming up, A / C not
operating
Engine running after warming up, A / C operating
Selector lever in "P" or "N"
position
Ignition switch
g
o s
c
ON
Selector lever in "R", "D", "2"
or "L" position
At specified idle speed after warming up
––––––––––––
––––––––––––
Within 3 seconds after ignition switch ON or
engine running
Engine stop at ignition switch ON.
Blower fan switch ON
Ignition switch
g
o s
c
ON
Blower fan switch OFF
Engine running after warming up, A/C not oper-
ating
Engine running after warming up, A/C operating
Engine running at idle speed and steering wheel
at straight-ahead position
Engine running at idle speed and steering wheel
turned to the right or left as far as it stops
M / T
a
g u ,
/ a
A / T
(199_F)
Display the barometric pressure
NORMAL CONDITION /
REFERENCE VALUES
700 r / min
750 r / min
More than 0.2 V
Less than 4.8 V
2.0 – 3.6 msec.
2.0 – 3.6 msec.
5 – 25%
– 35 – +35%
10 – 14 V
0 – 100%
ON
OFF
ON
OFF
OFF
ON
OFF
ON
OFF
ON
P/ N Range
D Range
0%
0 – 100%
ON
OFF
ON
OFF
OFF
ON
OFF
ON

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents