Toyota Celica 2005 Repair Manual page 1308

INSPECTION PROCEDURE
1 Input signal check.
Input Signal
Clutch switch
Light
OFF (Depress
clutch pedal)
OFF
NG
2 Inspect clutch switch assy.
OK
2005 CELICA (RM1131U)
DIAGNOSTICS
Indicator Light
Blinking Pattern
SW ON
ON
SW OFF
I26005
− CRUISE CONTROL SYSTEM (2ZZ−GE)
PREPARATION:
See input signal check on page DI−1090.
CHECK:
Check the indicator lights when clutch pedal is depressed.
OK:
The indicator light goes off when the clutch pedal is
depressed.
OK Proceed to next circuit inspection shown in
problem symptom table (See page DI−1099).
(a) Disconnect the clutch switch connector.
(b) Check that the continuity exists when the clutch switch
assy is operated.
OK:
Switch Position
Switch pin free
Switch pin pushed in
NG Replace clutch switch assy.
1307
DI−1107
Specified condition
No continuity
Continuity