Spanning-Tree Rstp - Dell S6100 Configuration Manual

Interface
Name
- ---- ------- --- ------- -------------------- --------
Te 1/1/1/1 128.257 128 20000 EDS 0 32768 0001.e801.6aa8 128.257
Interface
Name
--- ------ -------- ---- ------- --- ------- --------- ----
Te 1/1/1/1 ErrDis 128.257 128 20000 EDS 0 P2P No
Dell# show spanning-tree rstp
Root Identifier has priority 32768, Address 0001.e801.6aa8
Root Bridge hello time 2, max age 20, forward delay 15, max hops 0
Bridge Identifier has priority 32768, Address 0001.e801.6aa8
Configured hello time 2, max age 20, forward delay 15, max hops 0
We are the root
Current root has priority 32768, Address 0001.e801.6aa8
Number of topology changes 1, last change occurred 00:00:31 ago on Te 1/1/1/1
Port 257 (TenGigabitEthernet 1/1/1/1) is LBK_INC Discarding
Port path cost 20000, Port priority 128, Port Identifier 128.257
Designated root has priority 32768, address 0001.e801.6aa8
Designated bridge has priority 32768, address 0001.e801.6aa8
Designated port id is 128.257, designated path cost 0
Number of transitions to forwarding state 1
BPDU : sent 27, received 9
The port is not in the Edge port mode
Example (Guard)
Dell# show spanning-tree rstp guard
Interface
Name
---------- -------- -------------------
Te 1/1/1/1 0
Te 1/1/2/1 0
Te 1/1/3/1 0

spanning-tree rstp

Configure an RSTP interface with one of these settings: port cost, edge port with optional bridge port data unit (BPDU) guard, port
priority, loop guard, or root guard.
Syntax spanning-tree rstp {cost port-cost | edge-port [bpduguard [shutdown-on-
violation]] | priority priority | {loopguard | rootguard}}
Parameters
cost port-cost
edge-port
PortID Prio Cost Sts Cost
Role PortID Prio Cost Sts Cost Link-type Edge
Instance Sts
INCON(Root) Rootguard
FWD
BLK
Enter the keyword cost then the port cost value. The range is from 1 to 200000. The
defaults are:
• 100 Mb/s Ethernet interface = 200000
• 1-Gigabit Ethernet interface = 20000
• 10-Gigabit Ethernet interface = 2000
• Port Channel interface with one 100 Mb/s Ethernet = 200000
• Port Channel interface with one 1 Gigabit Ethernet = 20000
• Port Channel interface with one 10 Gigabit Ethernet = 2000
• Port Channel with two 1 Gigabit Ethernet = 18000
• Port Channel with two 10 Gigabit Ethernet = 1800
• Port Channel with two 100 Mbps Ethernet = 180000
Enter the keywords edge-port to configure the interface as a rapid spanning tree edge
port.
Designated
Bridge ID PortID
Guard type
Loopguard
Bpduguard
Rapid Spanning Tree Protocol (RSTP) 1371