Codes:C- connected, S - static, R - RIP,
Locally Originated,
type 1,
default,
Gateway of last resort is not set
R
R
R
R
C
Related
ip prefix-list
Commands
show ip prefix-list summary
show ip route summary
View a table summarizing the IP routes in the switch.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show ip route summary
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
The following describes the show ip route summary shown in the Example below.
Information
826
B- BGP, IN - internal BGP, EX - external BGP,LO -
O- OSPF, IA - OSPF inter area, N1 - OSPF NSSA external
N2- OSPF NSSA external type 2, E1 - OSPF external type 1,
E2- OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2- IS-IS level-2, IA - IS-IS inter area, * - candidate
>- non-active route, + - summary route
Destination
Gateway
-----------
-------
2.1.0.0/24
via 2.1.4.1, Gi 4/43
2.1.1.0/24
via 2.1.4.1, Gi 4/43
2.1.2.0/24
via 2.1.4.1, Gi 4/43
2.1.3.0/24
via 2.1.4.1, Gi 4/43
2.1.4.0/24
Direct, Gi 4/43
– enters CONFIGURATION-IP PREFIX-LIST mode and configures a prefix list.
– displays a summary of the configured prefix lists.
•
EXEC
•
EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Dist/Metric Last Change
----------- -----------
120/2
3d0h
120/2
3d1h
120/1
3d0h
120/1
3d1h
0/0
3d1h