Show Ip Route Summary - Dell S6000 Reference Manual

Gateway of last resort is not set
R
R
R
R
C
Related
ip prefix-list
Commands
prefix list.
show ip prefix-list summary

show ip route summary

View a table summarizing the IP routes in the switch.
S6000
Syntax
show ip route summary
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
766
Destination Gateway
----------- -------
2.1.0.0/24 via 2.1.4.1, Gi 4/43
2.1.1.0/24 via 2.1.4.1, Gi 4/43
2.1.2.0/24 via 2.1.4.1, Gi 4/43
2.1.3.0/24 via 2.1.4.1, Gi 4/43
2.1.4.0/24 Direct, Gi 4/43
— enters CONFIGURATION-IP PREFIX-LIST mode and configures a
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Dist/Metric Last Change
----------- -----------
— displays a summary of the configured prefix lists.
120/2 3d0h
120/2 3d1h
120/1 3d0h
120/1 3d1h
0/0 3d1h
IPv4 Routing