Show Interfaces Stack-Unit - Dell Force10 S4810P Reference Manual

show interfaces stack-unit

Display information on all interfaces on a specific S-Series or Z-Series stack member.
S-Series, Z-Series
Syntax show interfaces stack-unit unit-number
Parameters
unit-number
Command Modes
Command History
Version 8.3.11.1
Version 7.6.1.0
Example
FTOS#show interfaces stack-unit 0
GigabitEthernet 0/1 is down, line protocol is down
Hardware is Force10Eth, address is 00:01:e8:4c:f2:82
Pluggable media not present
Interface index is 34129154
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto, Mode auto
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 3w0d17h
Queueing strategy: fifo
Input Statistics:
pkts
Output Statistics:
pkts
Rate info (interval 299 seconds):
Time since last interface status change: 3w0d17h
GigabitEthernet 0/2 is down, line protocol is down
Hardware is Force10Eth, address is 00:01:e8:4c:f2:83
!-------------output truncated ----------------!
Related
show hardware stack-unit
Commands
show interfaces
Enter the stack member number (0 to 7).
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S-Series.
Current address is 00:01:e8:4c:f2:82
0 packets, 0 bytes
5144 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
0 packets, 0 bytes, 0 underruns
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte
0 Multicasts, 0 Broadcasts, 0 Unicasts
0 throttles, 0 discarded, 0 collisions
Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
Output 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
Current address is 00:01:e8:4c:f2:83
– displays data plane and management plane input/output statistics.
– displays information on a specific physical interface or virtual interface.
803