Show Interfaces - Dell N1100-ON Reference Manual

Example
The following example shows output with higher than normal CPU usage due
to packets copied to the software forwarding task.
console#show process cpu
Memory Utilization Report
status bytes
------ ----------
free 1053933568
alloc 673873920
CPU Utilization:
PID Name
---------- ------------------- -------- -------- --------
1129 osapiTimer
1133 _interrupt_thread
1137 bcmCNTR.0
1142 bcmRX
1147 ipMapForwardingTas
1155 bcmLINK.0
1156 cpuUtilMonitorTask
1170 nim_t
1208 dot1s_timer_task
1222 snoopTask
1291 RMONTask
1293 boxs Req
------------------------------ -------- -------- --------
Total CPU Utilization

show interfaces

Use the show interfaces command to list the traffic statistics for one or
multiple interfaces. If no parameter is given, all interfaces are shown.
Syntax
show interfaces [ interface-id ]
• interface-id—A physical interface id (i.e., a 1G, 10G, or 40G interface) in
standard interface format.
5 Secs 60 Secs 300 Secs
0.00% 0.00%
0.09% 0.01%
0.24% 0.31%
23.00% 27.01%
32.97% 37.11%
0.34% 0.36%
0.09% 0.05%
0.09% 0.08%
0.00% 0.00%
0.00% 0.00%
0.00% 0.02%
0.00% 0.01%
27.31% 28.97%
Layer 2 Switching Commands
0.01%
0.00%
0.31%
18.01%
29.92%
0.36%
0.04%
0.07%
0.01%
0.01%
0.03%
0.01%
31.01%
393