Hardware Watchdog Timer; Using The Show Hardware Commands - Dell S4820T Configuration Manual

Hardware Watchdog Timer

The hardware watchdog command automatically reboots an Dell Networking OS switch/router with a
single RPM that is unresponsive.
This is a last resort mechanism intended to prevent a manual power cycle.

Using the Show Hardware Commands

The show hardware command tree consists of commands used with the system. These commands
display information from a hardware sub-component and from hardware-based feature tables.
NOTE: Use the show hardware commands only under the guidance of the Dell Technical
Assistance Center.
The following lists the show hardware commands available as of the latest Dell Networking OS version.
• View internal interface status of the stack-unit CPU port which connects to the external management
interface.
EXEC Privilege mode
show hardware stack-unit {0-11} cpu management statistics
• View driver-level statistics for the data-plane port on the CPU for the specified stack-unit.
EXEC Privilege mode
show hardware stack-unit {0-11} cpu data-plane statistics
This view provides insight into the packet types entering the CPU to see whether CPU-bound traffic is
internal (IPC traffic) or network control traffic, which the CPU must process.
• View the modular packet buffers details per stack unit and the mode of allocation.
EXEC Privilege mode
show hardware stack-unit {0-11} buffer total-buffer
• View the modular packet buffers details per unit and the mode of allocation.
EXEC Privilege mode
show hardware stack-unit {0-11} buffer unit {0-1} total-buffer
• View the forwarding plane statistics containing the packet buffer usage per port per stack unit.
EXEC Privilege mode
show hardware stack-unit {0-11} buffer unit {0-1} port {1-64 | all} buffer-
info
• View the forwarding plane statistics containing the packet buffer statistics per COS per port.
EXEC Privilege mode
show hardware stack-unit {0-11} buffer unit {0-1} port {1-64} queue {0-14 |
all} buffer-info
• View input and output statistics on the party bus, which carries inter-process communication traffic
between CPUs.
S-Series Debugging and Diagnostics
1149