Show Hardware Mac - Dell C9000 Series Reference Manual

param3=0(0)}
EID 0x0000130d: gid=0xd,
flags=0x10202, Installed, Enabled
StageEgress
flags=0x10204, Installed, Enabled
IpType
L3Routable
OutPort
param3=0(0)}
{Packets}
Usage Information The port-set values are internal port numbers.

show hardware mac

Display information about the MAC ACLs used on a line card and port-sets.
C9000 Series
Syntax
show hardware mac {eg-acl {pe pe-id stack-unit unit-number port-
set port-pipe-id counters | linecard slot-id port-set number}| in-
acl {pe pe-id stack-unit unit-number port-set port-pipe-id
counters | linecard slot-id port-set number }}
Parameters
eg-acl | in-acl
linecardslot-id
pe pe-id
policer=
statistics=NULL
slice=0, slice_idx=0x1, part =0 prio=0x130d,
tcam: color_indep=0,
slice=1, slice_idx=0x1, part =1 prio=0x130d,
tcam: color_indep=0,
Offset: 208 Width: 5
DATA=0x00000004
MASK=0x0000000c
Offset: 166 Width: 1
DATA=0x00000001
MASK=0x00000001
Offset: 195 Width: 7
DATA=0x00000001
MASK=0x0000007f
action={act=Drop, param0=0(0), param1=0(0), param2=0(0),
policer=
statistics={stat id 110
Enter either the keyword eg-acl or the keyword in-acl to
display ingress or egress ACL data.
Enter the linecard slot-id parameters to specify a line card.
The range of slot IDs is from 0 to 11.
Enter the pepe-id parameters to specify a port extender (PE).
The PE ID range is from 0 to 255.
NOTE:
bridge feature is enabled.
slice = 0 idx=4 entries=1}
The pe option is only visible when the extended
Debugging and Diagnostics 793