Service Operations; Hdd - Canon imageRUNNER ADVANCE 6075 Series Service Manual

2
Technology > Main Controller > Service Operations > HDD

Service Operations

■ HDD

<Procedure of parts replacement>
Refer to Removing HDD
<Procedure of adjustment>
1. Before Replacing
Perform the following operations. Be sure to get an approval from the user beforehand.
1) Backup of the set/registered data
Use the Remote UI.
Management Settings > Data Management > Import/Export
Target data:
• Address List
• Forwarding Settings
• Settings/Registration
• Web Access Favorites
• Printer Settings
• Paper Information
2) Printing the set/registered data
Use the service mode.
(Lv.1) COPIER > FUNCTION > MISC-P > USER-PRT
List of the set/registered data which cannot be backed up is printed.
2 Technology > Main Controller > Service Operations > HDD
2. After Replacing
1) HDD format
1-1) Start with the safe mode. (While pressing 2 and 8 keys simultaneously, turn
ON the main powerswitch.)
1-2) Use SST to format all partitions.
2) Downloading system software
2-1) Use SST to download the system software (System, LANG, RUI and others).
3) Initializing the key, certificate and CA certificate
(Lv.2) COPIER > FUNCTION > CLEAR > CA-KEY
4) Turning OFF and ON the main power switch
5) Restoring the backup data
Use the Remote UI.
Management Settings > Data Management > Import/Export
6) Resetting/registering the data
While referring to the list of set/registered data which was printed before replacement,
reset/register the data.
7) When the user generates and adds the encryption key, certificate and/or CA ertificate,
request the user to generate them again.
8) Executing "Auto Adjust Gradation (Full Adjust)"
Settings/Registration mode: Adjustment/Maintenance > Adjust Image Quality > Auto
Adjust Gradation
2-32
2-32