Canon imageRUNNER ADVANCE 6075 Series Service Manual page 89

2
Technology > Main Controller > Service Operations > Main Controller PCB 2
1. Before Replacing
Perform the following operations. Be sure to get an approval from the user beforehand.
1) Backup of the set/registered data
Use the Remote UI.
Management Settings > Data Management > Import/Export
Target data:
• Address List
• Forwarding Settings
• Settings/Registration
• Web Access Favorites
• Printer Settings
• Paper Information
2) Printing the set/registered data Use the service mode.
(Lv.1) COPIER > FUNCTION > MISC-P > USER-PRT
List of the set/registered data which cannot be backed up is printed.
2 Technology > Main Controller > Service Operations > Main Controller PCB 2
2. When Replacing
1) Transferring the parts from old PCB to new PCB
• DDR2-SDRAM (1 pc.) (When option DDR2-SDRAM is installed: 2 pc.)
• Memory PCB
DDR2-SDRAM
Prohibited Operation:
Do not transfer the following parts to another model (which has a different serial
number).If you fail to do so, the Main Body does not activate normally and this might
cause to fail the restoration.
• Main Controller PCB 1
• Main Controller PCB 2 (with Memory PCB installed)
• Memory PCB
2-35
Memory PCB
F-2-46
2-35