Removing The Control Panel Led Pcb; Control Panel Cpu Pcb; Before Starting The Work; Removing The Control Panel Cpu Pcb - Canon iR7086 Series Service Manual

[2]
[2]
4) Remove the shielding plate assembly [1].
- 5 connectors [2]
- 2 screws [3]
- 8 screws [4]
[2]
[4]
[4]
5) Remove the control panel KEY PCB.
6) Remove the control panel LCD.

10.5.21.2 Removing the Control Panel LED PCB

iR7105 / iR7095 / iR7086
1) Remove the control panel LED PCB [1].
- 3 screws [2]
[2]

10.5.22 Control Panel CPU PCB

10.5.22.1 Before Starting the Work

iR7105 / iR7095 / iR7086
1) Remove the control panel.
2) Remove the 5 rubber pieces [1] from the back of the control panel.
[1]
3) Remove the control panel rear cover [1].
- 6 screws [2]
[2]
[1]
F-10-82
[4]
[1]
[2]
[4]
[3]
F-10-83
[1]
[2]
F-10-84
[1]
F-10-85
[2]

10.5.22.2 Removing the Control Panel CPU PCB

iR7105 / iR7095 / iR7086
1) Remove the control panel CPU PCB [1].
- 5 connectors [2]
- 6 screws [3]
[3]
[2]
[1]
0011-8163

10.5.23 AC Driver PCB

10.5.23.1 Before Starting the Work
iR7105 / iR7095 / iR7086
1) Remove the lower left cover.
2) Remove the upper left cover.
3) Remove the cover plate.
4) Remove the delivery anti-adhesion fan mounting plate [1].
- 1 connector [2]
- 6 screws [3]
[1]
0011-8155
[3]

10.5.23.2 Removing the AC Driver PCB

iR7105 / iR7095 / iR7086
1) Remove the AC driver PCB [1].
- all connectors of PCB
- 4 screws [2]
[2] [1]
F-10-86
[2]
[3]
F-10-87
[2]
F-10-88
Chapter 10
[2]
0011-8156
[3]
0010-9606
[3]
0011-9303
10-23