Reader Heater Unit-H1 Installation Procedure; Checking The Contents; Points To Note Before Installation; Turning Main Power Off - Canon imageRUNNER 2545 Series Service Manual

Reader Heater Unit-H1 Installation Procedure

Checking the Contents

[1]
[3]
[4] [5]
<For 230V model>
Confirm the following components with correct quantities are contained in the carton.
[1] Reader heater 2pcs.
[2] Heater harness 1pc.
[3] Wire saddle (large) 3pcs.
[4] Wire saddle (small) 3pcs.
[5] Screw 2pcs.
<For 120V model>
Get the following service parts ready for installation.
[1] Reader heater 2pcs.
[2] Heater harness 1pc.
[3] Wire saddle (large) 3pcs.
[4] Wire saddle (small) 3pcs.
[5] Screw 2pcs.
9
[2]
F-9-112
(FK2-0228)
(FM4-2929)
(WT2-5719)
(WT2-0507, only for use in iR-2545/2535)
(XB2-8400-609)
(FK2-9468)
(FM4-2929)
(WT2-5719)
(WT2-0507, only for use in iR-2545/2535)
(XB2-8400-609)
9

Points to Note Before Installation

■ Turning Main Power OFF

CAUTION
Perform the following in the order prior to the installation.
1) Turn the main power of the host machine OFF.
2) Confirm the control panel display and the main power lamp have turned OFF and
unplug the power cord.

■ Confirmation of Heater Driver PCB

Confirm that the heater driver PCB has already been installed in the host machine.
9-52
9-52