Ac Driver Pcb; Before Removing The Ac Driver Pcb; Dc Driver Pcb; Before Removing The Dc Driver Pcb - Canon iR C3380 series Service Manual

[1]
6) Remove the HVT2 [3].
- 2 connectors [1]
- 3 claws [2]
[3]
[2] [1]

10.5.14 AC Driver PCB

10.5.14.1 Before Removing the AC Driver PCB

/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Detach rear upper cover. (page 10-14)[Detaching the Rear Upper
Cover]
2) Detach rear lower cover. (page 10-15)[Detaching the Rear Lower
Cover]
10.5.14.2 Removing the AC Driver PCB
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove 7 connectors attached to the optional power supply PCB [1] and
remove 12 connectors connected to the controller power supply PCB [2].
2) Remove the mount [3] for the optional power supply and the controller
power supply.
- 9 cable clamps [4]
- 3 wire saddles [5]
- 1 connector [6]
- 5 screws [7]
[7] [1]
[5] [7] [5] [3]
3) Detach the lattice connector to the cassette pedestal.
- 1 screw [2]
[2]
[1]
F-10-88
F-10-89
[4] [2]
[4]
[7]
[7] [6] [4]
F-10-90
4) Remove the screw [1] that fixes the grounding wire [2].
5) Remove the AC driver PCB [3].
- 4 connctors [4]
- 2 edge saddles [5]
- 4 screws [6]
[5]
[4]

10.5.15 DC Driver PCB

10.5.15.1 Before Removing the DC Driver PCB

0014-1289
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Detach the rear upper cover. (page 10-14)[Detaching the Rear Upper
Cover]
2) Detach the rear lower cover. (page 10-15)[Detaching the Rear Lower
Cover]

10.5.15.2 Removing the DC Driver PCB

0014-1291
/ / / / iR C3380i / iR C3380 / iR C2880i / iR C2880
1) Remove the DC driver PCB cover.
- 8 screws [2]
[2]
2) Remove 28 connectors [1], 3 wire saddles [2], and 3 edge saddles [3] from
the DC driver PCB.
[2] [1]
F-10-91
[6] [5] [2] [1] [6]
[6] [3] [6] [4]
F-10-92
[1]
F-10-93
Chapter 10
0014-1292
0014-1293
[2]
10-25