Ih Power Supply Assembly; Dc Power Supply Unit - Canon imagerunner C5180 Service Manual

12.5.5 IH Power Supply Assembly

12.5.5.1 Preparation for Removing the IH
Power Supply Unit
1) Remove the rear fan cover. (page 12-
22)Reference[Removing the Rear Fan Cover]
2) Remove the rear upper cover. (page 12-
22)Reference[Removing the Rear Upper Cover]
3) Remove the rear lower cover. (page 12-
23)Reference[Removing the Rear Lower Cover]
12.5.5.2 Removing the IH Power Supply
Unit
1) Remove the IH power supply unit [4].
- 4 screws [1]
- 5 clamps [2]
- 6 connectors [3]
[1]
[4]
[3] [3] [3]
F-12-41

12.5.6 DC Power Supply Unit

12.5.6.1 Preparation for Removing the DC
Power Supply Unit
1) Remove the rear fan cover. (page 12-
22)Reference[Removing the Rear Fan Cover]
2) Remove the rear upper cover. (page 12-
22)Reference[Removing the Rear Upper Cover]
3) Remove the rear lower cover. (page 12-
23)Reference[Removing the Rear Lower Cover]
4) Remove the left rear cover (lower).(page 12-
22)Reference[Removing the Left Rear Cover
(Lower)]
5) Remove the IH power supply unit.(page 12-
29)Reference[Removing the IH Power Supply
Unit]
[1]
[2]
[3]
[3]
[2]
[3]
[2] [2] [2]
12.5.6.2 Removing the DC Power Supply
Unit
1) Remove the DC power supply unit connector
cover [2].
- 3 screws [1]
[1]
F-12-42
2) Remove the DC power supply unit [4].
- 4 screws [1]
- 2 clamps [2]
- 22 connectors [3]
[3]
[2]
[1] [3]
F-12-43
Chapter 12
[2]
[3]
[3] [3] [3]
[2]
[4]
[1]
12-29