NEC Univerge sv8500 Manual page 297

VLAN
The VLAN feature applies to MC terminals as well as other IP terminals, such as a DtermIP. When dividing one
physical network into multiple networks virtually, priority control (giving precedence to Voice Packet) can be
performed. Network data programming by the PCPro command ALIDL, and also setting VLAN to each MC
terminal by the maintenance command is required (see
tenance Command in
used in VLAN.
For detailed explanation of the VLAN feature, refer to the Data Programming Manual.
Note:
4.4.) VLAN Example shows an example network configuration when an Analog 2MC is
VLAN Example
VLAN data can be set from the maintenance terminal
by using maintenance command.
Analog
2MC
VLAN for Voice
Voice Packet
Data Packet
Analog 2MC (Analog Media Converter)
Data Assignment by PCPro in 4.3
SW
VLAN for Data
VLAN data can be set by
the PCPro command ALIDL
VOL.2-44
and How to Use Main-
Router