NEC Univerge sv8500 Manual page 263

< IP Address of Secondary DRS>
In the case of using Secondary DRS, specify IP address for it.
Command: set drssip
Example: Secondary IP Address is "10.41.207.31"
>set drssip 10.41.207.31
set done
When IP-BS receives the settings successfully, set done message is displayed. This specified settings
can be displayed by using show drssip command. To delete the setting, enter "0.0.0.0" for the IP ad-
dress.
<Hostname, IP Address and Domain of DNS>
To specify the DRS as host, specify hostname and IP address and domain name of DNS.
Command: set dnshn / dnsip / dnsdn
Example:
Hostname: bcd01
IP Address of DNS: 10.41.207.100
Domain Name: bcd.abk
>set dnshn bcd01
>set done
>set dnsip 10.41.207.100
>set done
>set dnsdn bcd.abk
>set done
When IP-BS receives the settings successfully, set done message is displayed. This specified settings
can be displayed by using show dnshn, show dnsip, and show dnsdn commands. To delete the setting,
enter "" for the host name or domain name, and enter 0.0.0.0 for the IP address. See the following ex-
ample.
>set dnshn ""
>set done
>set dnsip 0.0.0.0
>set done
>set dnsdn ""
>set done
[5] Write the settings
The system must be rebooted to write the data change. By using reboot, the IP-BS starts to operate with
the new data setting.
VOL.2-10
IP-BS (BS301)