Table 1-1 Table - Keysight N1913B EPM Series Service Manual

Table 1-2
The zero set specifications are only applicable to Keysight U2000 Series USB
NOTE
power sensors with serial prefixes as shown below:
– U2000A serial prefix MY480/SG480 and above
– U2001A serial prefix MY481/SG481 and above
– U2002A serial prefix MY482/SG482 and above
– U2004A serial prefix MY484/SG484 and above
For power sensors with earlier prefixes, refer to the Keysight U2000 Series USB
Power Sensors Operating and Service Guide.
Keysight N1913B/N1914B EPM Series Power Meters Service Guide
Zero set (internal and external) for U2000 Series (continued)
Power sensor
–30 dBm to –5 dBm
–8 dBm to 15 dBm
U2000/1B 10 dBm to 21 dBm
19 dBm to 25 dBm
23 dBm to 44 dBm
Specifications and Characteristics
Range Zero set (internal)
±1.8 µW
±12 µW
Zero set (external)
±800 nW
±2 µW
±2 mW
±4 mW
1
±2 µW
±10 µW
±1 mW
±2 mW
29