User Information
Measurement Applications
Offset Short
Connect the shim and the short to the appropriate test port, as shown in
3-5.
Figure 3-5
Connect the Shim and the Short to the Test Port
Reflect
Connect the short to the appropriate test port, as shown in
Figure 3-6
Connect the Short to the Test Port
Short
See
Thru
No device is required for this. Connect port 1 to port 2, as shown in
Keysight R, Q, U, V, and W11644A
"Reflect"
above.
Figure
Figure
3-6.
Figure
3-7.
3-5