Front Panel: Names And Functions Of Parts; Power Switch; Lcd; Softkeys - Keysight E4981A User Manual

Overview

Front Panel: Names and Functions of Parts

Front Panel: Names and Functions of Parts
This section describes the names and functions of the parts on the E4981A's
front panel. For more details on the functions displayed on the LCD screen, see
"Screen Area: Names and Functions of Parts" on page
Figure 2-1 Front panel

1. Power switch

Used for choosing between power-on and -off states of the E4981A. When
turned on, the switch lights up in yellow-green and all operating voltages are
applied to the instrument. When turned off, the switch lights up in orange and
no operating voltages are applied to the instrument.

2. LCD

The Liquid Crystal Display (LCD) displays measurement results, test conditions,
etc.
Occasionally there are missing pixels or constantly lit pixels, but this is not
a malfunction and does not affect the performance of your product.

3. Softkeys

Five softkeys are used to select measurement conditions and parameter
functions. Each softkey has a softkey label along its left side.
24 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
30.