Power Window Main Switch Initialization (Pinching Prevention Function Model); Door Mirror Components - Suzuki SX4 Service Manual

9E-26 Glass / Windows / Mirrors:
Power Window Main Switch Initialization
(Pinching Prevention Function Model)
CAUTION
!
• After replacing or disconnecting the driver
side door window regulator (motor), power
window main switch, battery or fuse, be
sure to execute initial setting (to have door
glass completely closed position learned).
If initial setting is not executed, correct
automatic operation (including pinching
prevention operation) would not be
available.
• Make sure that no foreign matter is
pinched while executing initial setting.
1) Open driver side door glass fully.
2) Raise driver side door window switch (MANUAL UP
position) of power window main switch until door
glass is closed completely and hold the switch in that
state for 2 seconds or more.

Door Mirror Components

1. Door mirror
S7RW0A9506032
1
2. Door mirror mounting nut
:Tighten nuts in such order as indicated in the figure.
1
2
3
1. AUTO UP position
2. MANUAL UP position
3. OFF position
3) Use auto-down / auto-up function of power window
main switch and check that door glass opens fully /
closes completely.
4) Check pinching prevention function referring to
"Inspection of Pinching Prevention Function
(Pinching Prevention Function Model)".
2
iii
ii i
3. Door mirror trim
I6RW0D950005-01
S7RW0A9506023
3
I5RW0A950038-03