Keyless Entry Answer Back Function Change-Over Procedure; Keyless Entry Receiver Removal And Installation - Suzuki SX4 Service Manual

9F-16 Security and Locks:
Keyless Entry Answer Back Function Change-
over Procedure
Output of keyless entry answer back function can be
switched over by performing the following procedure.
1) Confirm that all doors are closed, all doors are
unlocked, ignition key is out of ignition key cylinder
and interior light switch is in the middle position.
2) Perform Step a) through c) described below within
10 seconds.
a) Insert ignition key in ignition key cylinder.
b) Remove ignition key from ignition key cylinder.
c) Repeat Step a) and b) once.
3) Push "UNLOCK" button on transmitter 3 times within
10 seconds.
4) Interior light flashes once which indicates that
answer back function is changed over from A mode
to B mode.
NOTE
When answer back function is changed from
B mode to A mode, hazard warning lights
flashes once.
Answer back
A mode
LOCK
Flashes
Hazard warning
once
light
Interior light
S7RW0A9606023
Answer back
B mode
UNLOCK LOCK UNLOCK
Flashes
twice
Turn on Turn on
Flashes
for a for a
once
while while
I5RS0C960001-01
Keyless Entry Receiver Removal and
Installation
Removal
1) Disconnect negative cable at battery.
2) Remove grove box or console box referring to Step
6) of "Instrument Panel Removal and Installation in
Section 9C"or "Console Box Components in Section
9H".
3) Disconnect keyless entry receiver coupler.
4) Remove keyless entry receiver (1).
Installation
Reverse removal procedure.
S7RW0A9606024
1
I7RW0A960003-03