General Description; Key Coding Construction; Rear End Door Opener System Description - Suzuki SX4 Service Manual

Hide thumbs Also See for SX4:
Table of Contents

Advertisement

Security and Locks
Body, Cab and Accessories

Key Coding Construction

Key Usage and Identification
Key is used for ignition and door lock cylinders. Key is cut on both edges to make them reversible.
Key identification is obtained from five character key code stamped on key code tag. Using this key code, key code
cutting combination can be determined from a code list (available to owners of key cutting equipment from suppliers).

Rear End Door Opener System Description

Rear end door opener system consists of rear end door opener switch (1), rear end door opener relay (in BCM), rear
end door lock assembly (2) and BCM (3).
Rear end door opener system is activated by pushing rear end door opener switch after all doors are unlocked by
manual door switch, key cylinder switch, keyless entry transmitter or request switch (5) (if equipped).
When rear end door opener switch pushed rear end door opener relay is ON. Then, BCM releases latch of rear end
door lock assembly from striker and rear end door can be opened.
In addition, in case that rear end door cannot be opened by rear end door opener switch, rear end door can be opened
by emergency lever (4) in rear end door lock assembly.

General Description

[A]
5
1
2
[B]
4
[A]: Junction block with BCM type
[B]: Junction block without BCM type
Security and Locks:
3
3
9F-1
S7RW0A9601001
S7RW0A9601002
I6RW0C960001-01

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents

Save PDF