Rear Seat Removal And Installation; Specifications; Special Tools And Equipment; Recommended Service Material - Suzuki SX4 Service Manual

9G-6 Seats:

Rear Seat Removal and Installation

Hatchback model
Removal
1) Fold rear seat back forward.
2) Remove seat mounting bolts and nuts to remove
seat assembly.
3) Disassemble and repair seat as necessary.
Installation
Reverse removal procedure to install rear seat.
• Torque to specifications in "Rear Seat Components".
Tightening Torque Specifications
NOTE
The specified tightening torque is also described in the following.
"Front Seat Components"
"Rear Seat Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".

Recommended Service Material

NOTE
Required service material is also described in the following.
"Front Seat Components"
"Rear Seat Components"
Sedan model
S7RW0A9706004
Removal
Installation
Reverse removal procedure to install rear seat.
• Torque to specifications in "Rear Seat Components".
• When installing seat cushion, align seat cushion hook

Specifications

Special Tools and Equipment

1) Remove seat cushion.
2) Remove rear side sill scuffs referring to Step 3) of
"Floor Carpet Removal and Installation in Section
9H".
3) Remove rear seat side back.
4) Remove seat back.
5) Disassemble and repair seat as necessary.
with seat back bracket.
S7RW0A9707001
S7RW0A9708001