Compressor Assembly Components; Magnet Clutch Inspection; Magnet Clutch Removal And Installation - Suzuki Swift Sport 2004 Service & Repair Manual

Compressor Assembly Components

6
1. Armature plate bolt
2. Compressor
3. Relief valve

Magnet Clutch Inspection

• Check armature plate and magnet clutch pulley for
wear and oil soak respectively.
• Check magnet clutch pulley bearing for noise, wear
and grease leakage.
• Measure magnet clutch coil for resistance at 20 °C (68
°F). If the measured resistance does out of
specification, replace magnet clutch assembly.
Magnet clutch coil resistance
Standard: 3.5 – 4.0 Ω
1 (a)
4. Circlip
5. Shim
6. Magnet clutch coil and thermal switch
S7RS0B7216022
I4RS0A720038-01
Air Conditioning System: Manual Type 7B-29
2
9
3 (b)
8
4
5
7. Magnet clutch pulley
8. Armature plate
9. O-ring

Magnet Clutch Removal and Installation

Removal
1) Remove compressor from vehicle referring to
"Compressor Assembly Removal and Installation".
2) Fix armature plate (1) with special tool and remove
armature plate nut (2).
Special tool
(A): 09991–06310
3) Remove armature plate (1).
1
S7RS0B7216020
4
7
I4RS0A720037-01
: Do not reuse.
: 16 N⋅m (1.6 kgf-m, 11.5 lb-ft)
: 10 N⋅m (1.0 kgf-m, 7.5 lb-ft)
S7RS0B7216024
2
(A)
I4RS0A720039-01