Magnet Clutch - Suzuki RA410 Manual

MAGNET CLUTCH

REMOVAL AND INSTALLATION
Refer to AIR CONDITIONING BASIC MANUAL (99520-02130)
b 23 N·m (2.3 kg-m)
a 14 N·m (1.4 kg-m)
c 14 N·m (1.4 kg-m)
5
INSPECTION
Check pressure plate and rotor for wear and oil soaked condi-
tions respectively.
Check clutch bearing for noise, wear and grease leakage.
Measure stator coil for resistance at 20 C.
Standard Resistance: 3.4 – 4.1
If the measured resistance does not remain within above toler-
ance, replace coil.
Use an ohmmeter to check thermal switch for continuity.
If it is no continuity, replace it.
AIR CONDITIONING (OPTIONAL) 1B-21
a. Front head bolt
b. Front head bolt
: Tighten bolt (a) first, and
c. Armature plate bolt
1. Thermal switch
2. Compressor
3. O-ring
4. Lip type seal
5. Front head
6. Clutch coil
7. Compressor pulley
8. Circlip
9. Circlip
: Tightening Torque
10. Armature plate
next (b).