Neighbor Shutdown - Dell Z9500 Command Reference Manual

neighbor shutdown

Disable a BGP neighbor or peer group.
Z9500
Syntax
neighbor {ipv6-address | peer-group-name} shutdown
To enable a disabled neighbor or peer group, use the no neighbor {ipv6-
address | peer-group-name} shutdown command.
Parameters
ipv6-address
peer-group-
name
Defaults Enabled (that is, BGP neighbors and peer groups are disabled.)
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage
Peers that are enabled within a peer group are disabled when their peer group is
Information
disabled.
The neighbor shutdown command terminates all BGP sessions on the BGP
neighbor or BGP peer group. Use this command with caution as it terminates the
specified BGP sessions. When a neighbor or peer group is shutdown, use the show
ip bgp summary command to confirm its status.
Related
•
Commands
•
554
Enter the IPv6 address in the x:x:x:x::x format.
Enter the name of the peer group to disable or enable all
routers within the peer group.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
show ip bgp summary – displays the current BGP configuration.
show ip bgp neighbors
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
– displays the current BGP neighbors.
Border Gateway Protocol