Avaya S8700 Maintenance Manual page 2167

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

SNI-BD (SNI Circuit Pack)
Table 8-576. TEST #755 SNI Circuit Path Test — Continued
Error
Test
Code
Result
Description / Recommendation
103
FAIL
The SNI circuit pack cannot communicate with the SNI in slot 3 over the circuit
path.
1. Fix any on-board SNI-BD errors against this SNI and the SNI in slot 3. Use
2. Check the error log via display errors for other SNI circuit packs with
3. Replace this SNI.
4. Replace the SNI in slot 3.
104
FAIL
The SNI circuit pack cannot communicate with the SNI in slot 4 over the circuit
path.
1. Fix any on-board SNI-BD errors against this SNI and the SNI in slot 4. Use
2. Check the error log via display errors for other SNI circuit packs with
3. Replace this SNI.
4. Replace the SNI in slot 4.
555-233-143
display errors to find any SNI-BD errors and check display alarms to see
whether the errors have on-board alarms. Then follow the associated
repair procedures for SNI-BD.
SNI-PEER error type 257. If other SNI circuit packs have SNI-PEER error
type 257, then replace the SNI in slot 3. Replacing an SNI may be service
interrupting. See
''SNI-BD (SNI Circuit Pack)'' on page 8-1429
procedure for replacing an SNI.
NOTE:
If other SNI circuit packs do not have SNI-PEER error type 257 errors,
the problem could be at either of the peer SNI boards. It is arbitrary as to
which SNI is replaced first. Proceed as follows:
display errors to find any SNI-BD errors and check display alarms to see
whether the errors have on-board alarms. Then follow the associated
repair procedures for SNI-BD.
SNI-PEER error type 513. If other SNI circuit packs have SNI-PEER error
type 513, then replace the SNI in slot 4. Replacing an SNI may be service
interrupting. See
''SNI-BD (SNI Circuit Pack)'' on page 8-1429
procedure for replacing an SNI.
NOTE:
If other SNI circuit packs do not have SNI-PEER error type 513 errors,
the problem could be at either of the peer SNI boards. It is arbitrary as to
which SNI is replaced first. Proceed as follows:
for the
for the
Continued on next page
Issue 1 May 2002
8-1445

Advertisement

Table of Contents
loading

Table of Contents