Revision (Mst) - Dell N1100-ON Reference Manual

Example
The following example sets the configuration name to "region1".
console(config)#spanning-tree mst configuration
console(config-mst)#name region1

revision (mst)

Use the revision command in MST mode to identify the configuration
revision number. To return to the default setting, use the no form of this
command.
Syntax
revision version
no revision
• version — Configuration revision number. (Range: 0-65535)
Default Configuration
Revision number is 0.
Command Mode
MST mode
User Guidelines
When configuring the switch in MSTP mode, be sure to configure the MST
region name. For multiple switches to become members of the same region,
the configuration name, the configuration revision and mapping of VLANs to
MSTIs must be identical.
Example
The following example sets the configuration revision to 1.
console(config)#spanning-tree mst configuration
console(config-mst)#revision 1
733
Layer 2 Switching Commands