Show Policy Action - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show policy action

Displays information about pending and applied policy actions configured on the switch.
show [applied] policy action [action_name]
Syntax Definitions
applied
action_name
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Information for all policy actions displays unless action_name is specified.
•
The display may include any of the following characters:
character definition
+ Indicates a new policy action.
- Indicates the policy action is pending deletion.
# Indicates that the policy action differs between the
pending/applied actions.
Examples
-> show policy action
Action Name
action1
+action2
test_action
-> show policy action action2
Action Name
action2
page 39-192
Indicates that only actions that have been applied should be displayed.
The name of the action for which you want to display information; or a
wildcard sequence of characters for displaying information about
actions with similar names. Use an asterisk (*) to indicate a wildcard
character.
From Disp Pri Share
cli accept
cli accept
cli accept
From Disp Pri Share
cli accept
Bandwidth Max
Min Max Depth Bufs
No
No
Yes
Bandwidth
Min Max Depth Bufs
No
OmniSwitch CLI Reference Guide
QoS Policy Commands
Max
November 2009