Table of Contents
Advertisement
Optional Exhaust
Transition
Optional Foot Pedal
Window Control
Optional Electric
Thermo Scientific
The optional exhaust transition (P/N 191859 for 4 ft, 191860 for 6 ft) is a
canopy/thimble style. For installation, refer to the instruction sheet
included with the transition assembly.
Internal control wiring for this accessory (P/N 191913) is completed at the
factory. Qualified service personnel are required to perform installation.
Refer to the instruction sheet included with the foot pedal assembly.
1. Locate the foot pedal
control, shipped with
the unit in separate
packaging.
2. Locate the receptacle
(Figure 2-8) on the
underside left vertical
support rail.
3. Position connector until it aligns
properly with the receptacle. Do
not force together!
4. Screw together finger-tight.
5. Press the left side of the pedal to move the
window down, or the right side of the pedal
to move the window up. See Figure 2-10.
The controller for the electric
stand (P/N 191852 for 4ft,
Stand
191855 for 6 ft) includes an up
arrow (
▲
) and a down arrow (
See Figure 2-11.
Press the up arrow to raise the stand. Release when the desired position is
reached. If the arrow is not released, movement stops when the stand
reaches maximum height. The down arrow operates similarly.
Figure 2-8. Receptacle Location
Pedal
connector
Figure 2-9. Connector & Receptacle
Press here for
window down.
Figure 2-10. Foot Pedal
Window Control
▼
).
Figure 2-11. Arrow keys on Controller
Section 2
Installation
Unit
receptacle
Press here for
window up.
Model 1400 Series
2-7
Advertisement
Table of Contents
