Attendantconference; Attendantconsoledisplaylanguage - Mitel SX-200 Practices

Features Description
Attendant Conference
Description
This feature allows the Attendant to enter into a conference with the desti-
nation party and the source party of a call. The Attendant may also initiate
a 3-party conference call. When the Attendant is in a conference, a peri-
odic warning beep is given to all internal parties if System Option IO
(Attendant Conference Beeps) is enabled.
Conditions
The following conditions apply to this feature:
;
l
The console may be involved in a conference with a maximum of two
other parties.
l
A conference cannot be created involving another console or a Call
Announce Port.
l
Device interconnection checks do not apply to the conference.
Programming
To enable Attendant conference warning beeps, enable System Option
10 (Attendant Conference Beeps).
COS Option 120 (Attendant Conference Disable) must be DISABLED in the
Console's COS.
Operation
.
To enter into a conference with the source and destination parties, press
the CONF softkey.
To initiate a conference, perform the following procedure:
l
Dial the first party and establish a connection.
l
Dial the second party and establish a connection.
l
Press the CONF softkey. The three parties are now in a conference.
Attendant Console Display Language
Description
This feature allows the Attendant to change the display of Attendant Con-
sole softkeys from English to French, or from French to English.
Conditions
None.
Programming
None.
105 2-26
Revision 0
9109-096-l 05-NA Issue 1