Mitel SX-200 Practices page 724

.
Hotel/Motel Feature Package Description
Chart 4-l Programming the Hotel/Motel Application
(continued)
Step Action Comments
204 Call Block Applies (Performed by
Room Telephone.
Room telephones are
Attendant Console only)
prevented from calling each other when call
blocking is enabled, Error (reorder tone) is
heard. This COS option must be set for each
room telephone call block applies to. COS
option 113 and System Option 09 must also
\
be set.
This must be enabled for each room the
console blocks calls to and from,
220 Do Not Disturb
Room Telephone.
Do Not Disturb must be
enabled for any telephone that requires use
of the feature. When Do Not Disturb is
active, the telephone appears busy to
incoming calls.
230 Message Register Overflow Alarm
Extension or Trunks.
Optional. This COS
option should be set for the extension(s) or
trunk(s) for which there is to be a message
register overflow alarm indication at the
attendant console. The alarm icon flashes
and a maintenance log is generated.
See also COS option 703.
See also the following system options:
System Option 49
System Option 04
System Option 23
System Option 40
231 Message Waiting Bell
Room Telephones.
This COS option rings
the bell on a room telephone when there is a
message waiting. See also System Option
02 (Form 04). COS options 231 and 232
cannot be enabled at the same time. See
Note.
232 Message Waiting Lamp
Room Telephones.
This COS option lights
the message lamp on a room telephone
when there is a message waiting. See also
System Option 02 (Form 94). COS options
231 and 232 cannot be enabled at the same
time.
Note:
COS option 231 rings a message bell
only. COS option 232 lights message lamps
and also rings message bells.
Page 3 of 9
602 4-4 Revision 0
9109-096-602-NA
Issue 1