Mitel SX-200 Practices page 192

Features Description
To deactivate Forwarding:
l
Press the SELECT FEATURES key
l
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
and destination are displayed.
l
Press the OFF softkey to deactivate forwarding; if deactivation is not
desired, press the EXIT softkey.
To Set Up or Modify Forwarding:
l
With the handset on-hook, press the PROGRAM feature key.
;
l
Press the CALL FWD feature key.
l
For internal destination, dial the desired forwarding destination
The alphanumeric display shows a Forwarding type. If the displayed type is
not the one required, press the NO softkey; another type is displayed.
Repeat until the desired type is displayed. When the displayed type appears,
press the YES softkey.
l
For external forwarding, press the SPEED CALL key associated with
the number or dial the Abbreviated Dial number, if available, or
enter
digits from the keypad.
l
Check that the destination number indicated on the display is correct.
- To correct an error, use the +
key.
. If the destination is correct, press the
SAVE softkey.
SUPERSET 4 DN Telephones:
To display the current forwarding type and destination:
l
Press
SuperKey.
l
Find the
Forwarding
softkey.
(Use the More softkey).
l
Press the Forwarding
softkey. The display shows the current forward-
ing type and destination,
if programmed.
l
Press
SuperKey to
return to normal display.
To activate Forwarding already programmed:
l
Press the Turn FWD On
softkey. cFWD ON> appears
in the upper
right corner of the LCD.
To deactivate Forwarding:
l
Press the Turn FWD Off
softkey. 4WD ON> disappears from the dis-
play.
To Set Up Forwarding:
105 2-120
l
Press
SuperKey.
Revision
0 9109496-l
0!5-NA Issue
1