Mitel SX-200 Practices page 249

Features
Data Demultiplexer
Description
The Mite1 Data Demultiplexer used with SX-IO@ and SX-200 PABX
systems may be used with the
SX-200
DIGITAL PABX. The PABX pro-
vides digit identifiers in front of each printed line in order to route the
RS-232 output to various storage devices. Refer to Mite1 Data Demulti-
plexer Programming, Installation and Technical Manual
9160-080-30&NA for additional information on the device. The Directed
Input/Output feature of the SX-200 DIGITAL PABX replaces the Data De-
multiplexer feature.
Conditions
Programming
Operation
The printout type and the digit identifier used for it are as follows:
CDE data print
-0
ACD -0
Traffic Measurement - 0
TRUNK SMDR -1
DATA-SMDR -1
Printer tests -1
Hotel/Motel -2
Maintenance -3
Enable System Option 15 (Data Demultiplexer).
Refer to Mite1 Data Demultiplexer Programming, Installation and Technical
Manual 9160-080-300-NA, for further programming information.
Refer to Mite1 Data Demultiplexer Programming, Installation and Techni-
cal Manual 9160-080-300-NA, for additional information.
Data Hunt Groups
Description
Datasets can be assigned to a Data Hunt Group. The system supports
both Terminal and Circular hunting; see Hunt Groups.
This feature is not available in Generic 1001.
Conditions
The following conditions apply to this feature:
0 Only datasets can be assigned to a Data Hunt Group.
l
The system can support a total of 50 hunt groups; a hunt group may
have a maximum of 50 members.
9109-09&105-NA
Issue
1
Revision
0
105 2-177