Attendanttrunkbusy-Cut - Mitel SX-200 Practices

Features
Attendant Trunk Busy-Out
Description
The Attendant may busy-out a trunk to prevent access to the trunk, and
may remove the busy condition as required. If the Trunk Busy-Out En-
able option is not selected, the Attendant may still access individual
trunks, but is unable to force them into a busy condition.
Conditions
The following conditions apply to this feature:
;
l
As with station and SUPERSETtelephones, if the trunk is not idle
when the busy is attempted, the busy out will be pending and will be
processed when the trunk becomes idle.
l
The console must be able to connect to the trunk; see Device Inter-
connection Control.
Programming
Enable COS Option 114 (Attendant Trunk Busy-Out) for the console.
Operation To busy out a trunk, perform the following procedure:
l
Press the FUNCTION key.
l
Press the ATT FUNCTION softkey.
l
Press the TRUNKS softkey.
9 Enter trunk number.
l
Press the BUSY OUT softkey.
0 Press the SET softkey.
To return a trunk to service, perform the following procedure:
l
Press the FUNCTION key.
0 Press the A7T FUNCTION softkey.
l
Press the TRUNKS softkey.
l
Enter trunk number.
l
Press the BUSY OUT softkey.
l
Press the CLEAR softkey.
9109-09&105-NA
Issue
1
Revision
0 105 2-55