Mitel SX-200 Practices page 783

Ia .I
Using the Hotel/Motel Feature Package
Maid in Room
Feature Description: Reference page 602 2-42.
Programming: Reference Chart 4-15.
Operation:
Chart 5-37 Changing Maid in Room Status from the Room Telephone
Maid
,
1. On entering the room, pick up the handset and For example, 111 could be the Maid in
dial the Maid In Room access code and the code
Room access code.
for Maid in Room, then hang up.
1 means maid is in room.
The number to be dialed is 1111,
2.
When you are finished in the room, pick up the
handset and dial the Maid in Room access code
4 = room to be inspected, maid not in
room.
and the code for Room to be Inspected, Maid not
in Room.
The number to be dialed is 1114.
If you leave the room without finishing your job,
2 = no maid in room,
dial the code for No Maid in Room,
The number to be dialed is 1112.
Hang up after you dial.
Supervisor
3. Enter the room and check it. If satisfactory, enter 3 = room clean, maid not in room.
the Maid in Room access code and the code for
Room Clean, Maid not in Room, then hang up. The number to be dialed is 1113,
Notes: 1. At any time, the current room status can be displayed on the console, a front desk
terminal, or on a
SUPERSET4, SUPERSET420, SUPERSET4DN
or a
SUPERSET
430 telephone. See Maid in Room Status Display
- SUPERSET 4/SUPERSET 420/
SUPERSET 4DNlSUPERSET
430 Telephones.
2. In the above example, the Maid in Room access code is Ill.
9109-096-602-NA Issue 1 Revision 0
602 5-31