Mitel SX-200 Practices page 236

Features Description
Data: Associated Data Line (ADL)
Description
The associated data line feature allows a telephone user to originate and
disconnect a data call. The association between a telephone (used for
dialing or disconnecting the call) and a dataset the call is switched to,
once the setup is complete.
,The user can establish a basic ADL call from an industry-standard
telephone or a SUPERSETtelephone by dialing an access code and the
number of the destination.
The associated data line operates with either asynchronous or synchronous
devices.
The data destination of any data call can be predetermined via the HOTLINE
feature (see Data:
ADL Hotline).
Industry Standard DTMF and rotary
telephones,
SUPERSET
telephones, and Digital
SUPERSET
telephones
can be used in ADL calls. Either the originator or destination can terminate
the data call.
This feature is not available in Generic 1001.
This feature allows the user to establish a basic
ADL
call by dialing an access
code and the number of the destination from an industry-standard
telephone or a SUPERSETtelephone.
Data destinations include:
l
data station extension number
l
data hunt group access code
l
modem hunt group access code followed by ARS digit string.
Included with originate/disconnect capabilities of ADL are the following:
9 Data call originate using SPEED CALL key or Abbreviated Dial
l
ADL queuing
l
Data call disconnect using SPEED CALL key or Abbreviated Dial, or
the Disconnect or CALlJAnN key.
The Associated Data Line can be used to originate or disconnect a data call,
operating in either asynchronous or synchronous mode.
Conditions The following conditions apply to this feature:
l
The attendant console cannot use the ADL feature.
. Program the associated voice line (AVL) in CDE Form 12 (Data Assign-
merit).
105 2-164 Revision
0
9109-096-l 05-NA
Issue
1