Mitel SX-200 Practices page 171

Features
Forwarding is now active; the word FWD is displayed in the top left corner of
the LCD as a reminder.
To deactivate Forwarding:
.
.
.
Press the SELECT FEATURES key.
Dial 1 (feature number 1 is Forwarding (1 :FWD)) -the current type
and destination are displayed.
Press the OFF softkey to deactivate forwarding; if deactivation is not
desired, press the EXIT softkey.
i
Note: If Split Forwarding is enabled, press the NEXT softkey to examine settings for
internal calls.
To Set Up or Modify Call Forwarding - Don' t Answer:
l
With the handset on-hook, press the PROGRAM feature key.
l
Press the CALL FWD feature key.
The alphanumeric display shows a Forwarding type. If the displayed type is
not the one required, press the NO softkey; another type is displayed.
Repeat until Call Forwarding - Don' t Answer is displayed; then press the
YES softkey.
Dial the forwarding destination, If the call is to be forwarded to an outside
number, press the SPEED CALL key associated with that number or dial the
Abbreviated Dial number, if available.
0 Check that the number on the display is correct.
- To correct an error, use the 4 key.
l
Press the SAVE softkey.
SUPERSET
Telephones:
To display the current forwarding type and destination:
l
Press
SuperKey.
l
Press the No softkey until CALL FORWARDING? appears in the dis-
play.
l
Press the Yes softkey. The display shows the current forwarding type
and destination, if programmed.
l
Press
SuperKey
to return to normal display.
To activate Forwarding already programmed:
l
Press the CALL FORWARD Feature key. The indicator beside the key
turns on to indicate that Call Forwarding is activated. (Refer to Feature
Keys for instructions on programming this feature key).
or, if a CALL FORWARD Feature key isn' t programmed,
9109-096-l 054A
Issue 1
Revision 0 105 2-99