Mitel SX-200 Practices page 688

Hotel/Motel Feature Packaae Descriotion
Check Out
(Front Desk Terminal only.) This softkey provides a simple checkout procedure. It is
only provided if the occupancy setting of the guest room is Occupied. it has these
functions:
l
Sets the room occupancy field to vacant. Sets the room condition to dirty.
l
Sets the call restriction to the setting specified in System Option 57 (Vacant/res-
erved default call restriction).
,
l
Once the check out key is pressed, the softkeys are updated to presentCa&l and
Enter
keys only.
Cancel
resets the room conditions as they were originally. When
Enter
is pressed, the guest name is erased, DND is turned off (if it was set), the
message register is cleared, and wakeup is turned off (if it was set).
How fo ProgmJ
N/A
How fo Use
Console: N/A
FDTz Chart 5-24
Do Not Disturb
Do Not Disturb blocks calls from ringing at a guest's telephone. Outgoing calls are not
affected. See Table 2-12, Callers to a telephone with Do Not Disturb active hear
reorder (error) tone. The message Do Not Disturb appears on display sets. The system
can be programmed to reroute these calls to a predetermined answering point. The
console,
SUPERSET
4DN and
SUPERSET
430 telephones can override Do Not
Disturb.
The attendant console can set and clear Do Not Disturb for a guest room telephone.
This can be done whether or not the console is connected to the guest room phone.
The front desk terminal can set Do Not Disturb in Room Update mode while the highlight
bar is on the DND field.
s
A guest can set and clear Do Not Disturb from a guest room telephone.
602 2-38
Revision 0 9109-096-602+lA
Issue 1