Mitel SX-200 Practices page 594

Station Messacle Detail Recordinn
Forced account codes can also be assigned to DISA trunks via the COS of the special
DlSAtrunk in order to force avalidation check on incoming DlSAcalls. System dial tone
is not returned to the caller until a valid independent account code is received.
Operation
Account Code entry at the start of an outgoing call:
l
Lift handset - dial tone is returned.
l
Dial the feature access code followed by the account code and terminator (#); the
\
terminator is not required with fixed length account codes,
. Dial trunk access code (usually 9).
l
Dial the outgoing number.
Account code entry during a call on a
SUPERSET4@
telephone:
l
Press SELECT FEATURES key.
l
Dial feature "5" (Account Codes).
l
Enter Account Code number.
l
Press SAVE softkey.
Account code entry during a call on a
SUPERSET4Zp
telephone:
l
Press SUPERKEY
l
Press NO softkey until ACCOUNT CODE? appears.
l
Press YES softkey.
l
Enter Account Code number.
l
Press SAVE softkey.
Account code entry during a call on a
SUPERSET
4" DNISUPERSET 430" tele-
phone:
e
l
Press ACCOUNT CODE softkey.
. Enter Account Code number.
l
Press SAVE softkey.
Note:
The SUPERSET 430 is not available with Generic 1005 FPKG 1 and LIT96.
221 A-2 Revision 0 9109-096-22l-NA
Issue 1